legacy communications card in an SMT series UPS

BillP · ‎2021-06-30

Hi all

I am trying to find out if when the legacy communications card is installed in an SMT3000 the built-in serial and USB ports will continue to work?
The other thing I would like to know is if I can connect my RAID (Active Storage) via serial to the LCC as it is not recognised when I use the internal serial (RJ45) port on the SMT3000.

Thanks

Stuart

BillP · ‎2021-06-30

Hi Stuart,

The ports on the UPS will no longer work. this is a knowledgebase article i have available that reviews requirements and expected functionality -> http://nam-en.apc.com/app/answers/detail/a_id/11007/

hope that helps. let me know if you have additional questions.

See Answer In Context

BillP · ‎2021-06-30

Hi Stuart,

The ports on the UPS will no longer work. this is a knowledgebase article i have available that reviews requirements and expected functionality -> http://nam-en.apc.com/app/answers/detail/a_id/11007/

hope that helps. let me know if you have additional questions.