db9 to rj45 smartups 5000

[jchutch2_apc]

This was originally posted on APC forums on 12/3/2007

---

OK...I have an older ups smart ups-5000. It has a 9 pin serial port for management. I just bought a new server sun v245. It's serial port is rj45. The cable that's there now and currently working is a 940-0024C. I'm just wondering where I can find a pinout to make this work for me. Easiest would be to use a cat5 cable and just pinout the end with an adapter for db9m. But anything would work. Any help or direction would be GREATLY appreciated.

[jchutch2_apc]

This was originally posted on APC forums on 12/3/2007

---

I'm not necessarily looking for the pinout of the cable. Just for an adapter, if that makes a difference. More specifically, I just wanna know how I can connect the two so I can get my powerchute software working and get my boss off my back. If someone could direct me to any solution at all...

[EZ_Button_apc]

This was originally posted on APC forums on 12/3/2007

---

I have a document that may be of use to you. I'm going to PM you the information.

[elesueur_apc]

This was originally posted on APC forums on 3/23/2010

---

could you please send me the information? I am trying to work out why the Network management part of my smart UPS 5000 is not responding, and I haven't got the serial cable - I would like to make my own with DB9->RJ45 adapters.

[BillP]

This reply was originally posted by Laurie on APC forums on 3/23/2010

---

I'm not sure if EZ button is still around, though it may be worth your while to give Google a shot...

[perplex_apc]

This was originally posted on APC forums on 10/12/2009

---

EZButton, I'd appreciate the same information if you don't mind.

[BillP]

This reply was originally posted by Piotr on APC forums on 9/27/2008

---

Hello,
I looking for solution of my connection problem beatween Sparc Server (rs-232 on rj45) and SmartUPS 1000 (rs-232 - db9).

EZ Button could you send me that info?
Help me, please.

zywcu

[EZ_Button_apc]

This was originally posted on APC forums on 9/29/2008

---

Let me PM you the info.

[jchutch2_apc · Accepted solution]

This was originally posted on APC forums on 12/3/2007

---

OK...I have an older ups smart ups-5000. It has a 9 pin serial port for management. I just bought a new server sun v245. It's serial port is rj45. The cable that's there now and currently working is a 940-0024C. I'm just wondering where I can find a pinout to make this work for me. Easiest would be to use a cat5 cable and just pinout the end with an adapter for db9m. But anything would work. Any help or direction would be GREATLY appreciated.