Posted: 2021-07-01 01:29 AM . Last Modified: 2024-03-06 01:38 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 01:29 AM . Last Modified: 2024-03-06 01:38 AM
Web agent cannot communicate with UPS
Good morning.
I have a APC UPS model SC1500 connected to a single PC via usb-serial adapter.
I had installed correctly the PCBE agent software (also the UPS was deteced automatically during software installation).
But when a try to start the agent web interface the internet explorer show the message "cannot display the webpage".
I try to:
- shutoff the firewall
- reintall the agent software
- add manually the port 3052 on the firewall
but nothing change.
any suggestions?
thanks
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
Posted: 2021-07-01 01:29 AM . Last Modified: 2024-03-06 01:38 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 01:29 AM . Last Modified: 2024-03-06 01:38 AM
Problem solved
the correct adress of ups is https://127.0.0.1:6547
not :3045
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 01:29 AM . Last Modified: 2024-03-06 01:38 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 01:29 AM . Last Modified: 2024-03-06 01:38 AM
Problem solved
the correct adress of ups is https://127.0.0.1:6547
not :3045
Link copied. Please paste this link to share this article on your social media post.