UPS which is giving SNMP trap for power status.

Anonymous user · ‎2021-06-30

Hi,
I need to get the details of commonly using UPS which will give SNMP trap for the UPS status.
Also please help me how to set the snmp trap using that UPS and all the details which will help me to implement that snmp trap receiver.

Thanks,
Deepesh

BillP · ‎2021-06-30

hello,

for SNMP support, you'll need a UPS with a SmartSlot so you can install a network management card. Some UPS also come with a pre-installed network management card. our network management cards support SNMPv1 or v3 and support up to (6) trap receivers. Once you get a network management card, the steps to set up a trap receiver are pretty simple once you have a trap receiver or SNMP NMS set up on your network.

See Answer In Context

BillP · ‎2021-06-30

Generally speaking, our devices allow you to communicate over SNMP however you will still need to set it up on your side. What type of UPS are you using? Once we know this, we can point in the right direction on how to configure your APC ups.

BillP · ‎2021-06-30

hello,

for SNMP support, you'll need a UPS with a SmartSlot so you can install a network management card. Some UPS also come with a pre-installed network management card. our network management cards support SNMPv1 or v3 and support up to (6) trap receivers. Once you get a network management card, the steps to set up a trap receiver are pretty simple once you have a trap receiver or SNMP NMS set up on your network.