UPS Configuration When Disconnected From Power SMX3000RMLV2UNC

[ross]

How long does a SMX3000RMLV2UNC UPS hold its own configuration if not connected to power.

[Teken · Accepted solution]

If you’re inquiring about the main UPS the user defined settings are indefinite once set. If this is for the NMC the only thing that will be impacted is the system time until it can be updated by NTP. 

Keep in mind depending upon the how old your NMC is the internal coin cell is also a factor in how the NMC behaves.

Lastly, if the unit is going to be moved to cold storage the battery cartridge must be disconnected and removed from the unit. The same must be recharged based on its SOC.

Let me know if that answers your question.

[ross]

More context to my previous post.  We have a few SMX3000RMLV2UNC's going to a remote site.  They may not be powered for a month or so, prior to installation.  
I am trying to determine if we will need to reconfigure the user defined settings, once the build out starts.  I am assuming that the settings will be held for a month or so. However, I have not found anything in the user manual that calls out these numbers.

[Teken · Accepted solution]

All of the user defined settings will be retained once set. Simply disconnect the battery cartridge from the system during that time period.

Let me know if you have more questions. If not please do mark the reply that answered your query as a solution. So it may help the next person asking the same. 👍