Ask our Experts
Didn't find what you are looking for? Ask our experts!
Launch of Consumer/Home Owner registration process! We are pleased to announce the commencement of the Consumer/Home Owner Registration Process on Community. Consumers/Home Owners may now proceed to register by clicking on Login/Register. The process is straightforward and designed to be completed in just a few steps.
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Search in
Free
EnglishStrengthen your foundational knowledge in Data Centers for free, enroll in this path today and start your learning journey!
Posted: 2021-06-29 06:13 AM . Last Modified: 2024-03-12 11:53 PM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-29 06:13 AM . Last Modified: 2024-03-12 11:53 PM
Hello
How can i done this scenario?
Consider that we have a main fuse switch to lets UPS turns on.
With the PCNS could send signal to turn of UPS outlet and itself,is it true?(Is it SAFE-SHUTDOWN??? or Turn off outlets immediately?)
Then we need turn off the FUSE SWITCH to make power down completely,if we want to turn on PCs only with turning on FUSE Switch and dont push the PCs "Power-on" button is it possible to do that?
If the answer is YES,then how is it possible?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-29 06:13 AM . Last Modified: 2024-03-12 11:52 PM
Two ways:
- Reboot the outlet powering the PC to turn it on. Make sure PC BIOS is set to turn computer on when power becomes available.
- Use Wake-on-LAN.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-29 06:13 AM . Last Modified: 2024-03-12 11:52 PM
Two ways:
- Reboot the outlet powering the PC to turn it on. Make sure PC BIOS is set to turn computer on when power becomes available.
- Use Wake-on-LAN.
Link copied. Please paste this link to share this article on your social media post.
You’ve reached the end of your document
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.