Set number of connected batteries using AP9631 NMC card.

wgstarks_apc · ‎2021-06-29

This was originally posted on APC forums on 8/15/2016

I have an SURTA1500RMXL2U UPS with a connected SURTA48RMXLBP2U external battery pack. I need to change the number of batteries in the ups settings via the installed NMC card (AP9631). I've set her through the command line guide but I don't see what command to use to configure this setting.

BillP · ‎2021-06-29

This reply was originally posted by Angela on APC forums on 8/15/2016

Right, I do not see an option for this on the command line for type of UPS when I checked. We'll have to fix those other issues up first and then we'll hopefully be able to take care of it.

See Answer In Context

wgstarks_apc · ‎2021-06-29

This was originally posted on APC forums on 8/15/2016

So I'm guessing this can't be set from the command line? Hopefully I'll be able to get the web interface working. Thanks for your help with these issues.

BillP · ‎2021-06-29

This reply was originally posted by Angela on APC forums on 8/15/2016

Right, I do not see an option for this on the command line for type of UPS when I checked. We'll have to fix those other issues up first and then we'll hopefully be able to take care of it.