SNMP (input voltage) is not precisely (SmartUPS 3000 RM)

[Anonymous user]

Hello,

I use following command:
snmpwalk -v1 -c public 192.168.0.100 .1.3.6.1.4.1.318.1.1.1.3.2.1

Answer:
SNMPv2-SMI::enterprises.318.1.1.1.3.2.1.0 = Gauge32: 227

Is it possible to read this value more precisely, because GUI (Web/SNMP Management Card) says "Input Voltage: 227.4 VAC"?


Yours sincerely

hurricane

Message was edited by: hurricane

[TheNotoriousKMP_apc · Accepted solution]

Unfortunately it looks like it's a 3 digit reply, and it's going to be a 3-digit whole value.