RESET AP 9619 NMC

Anonymous user · ‎2021-07-01

Hye All,

I have a NMC AP9619 that I wish to configure. The prob is it has an IP Address that I do not know.
I wish to reset it manually to factory default. Is it possible to do that?
Will resetting the card affect the UPS on which it's connected?

Thanks for your help

BillP · ‎2021-07-01

Unfortunately, the only way to reset to defaults is to login via the IP or login via hyper terminal using the serial cable that came with the UPS. I would recommend you hyper terminal into the UPS. You can then check/edit the IP address. What type of UPS is this ap9619 installed in?

See Answer In Context

BillP · ‎2021-07-01

Unfortunately, the only way to reset to defaults is to login via the IP or login via hyper terminal using the serial cable that came with the UPS. I would recommend you hyper terminal into the UPS. You can then check/edit the IP address. What type of UPS is this ap9619 installed in?