PowerChute Network Shutdown v4.2 VMware Virtual Appliance - IP address assignment

BillP · ‎2021-06-29

Hello,

when I was deploying PCNS Appliance v4.2 I set static IP address see below, but appliance still use DHCP. Where can I change it please?

VMware vCenter: 6.5 Update 01c; ESXi: 6.5 Update 01

tCGul5bIJlg5qKAHd49F5Q%3D%3D&Rest-Api-Key=d3Bhc3F1aWw6NjM3MzU2MWEtNzYzMC00OTc5LTkyMTAtOTJjYTU0NGEwZWFl.jpeg

Thanks in advance.

Lukas

BillP · ‎2021-06-29

Hi,

You can assign the ip information using the TUI utility as listed in Schneider Electric FAQ FA332022 or by editing the ifcfg file as listed in this post http://forums.apc.com/spaces/7/ups-management-devices-powerchute-software/forums/general/82534/power...

I prefer to edit the ifcfg file but only because I am comfortable with using vi editor.

BillP · ‎2021-06-29

Hi,

You can assign the ip information using the TUI utility as listed in Schneider Electric FAQ FA332022 or by editing the ifcfg file as listed in this post http://forums.apc.com/spaces/7/ups-management-devices-powerchute-software/forums/general/82534/power...

I prefer to edit the ifcfg file but only because I am comfortable with using vi editor.

This is a heading