Network management card 2 and Windows 2000 Server

Anonymous user · ‎2021-06-30

Hi!

I'm looking for network management card for my SUA2200 UPS, to achieve controlled shutdown for three Windows 2000 Servers in case of power failure.
Is there software for the current network management card 2 (f.ex. AP9630), which could be used with WIndows 2000?

Anonymous user · ‎2021-06-30

You can install the Management Card in a card slot in a
Smart-UPS, Matrix-UPS, Symmetra UPS, or AIS 5000 UPS.
For a Silcon UPS, install the Management Card in a Silcon
Triple Chassis Protocol Converter (AP9604S).

[ Managed Network Solutions|http://www.managed.com/networking/]

Message was edited by: jack25d

See Answer In Context

BillP · ‎2021-06-30

hi

even though PCNS 3.0 is not tested on Windows Server 2000, i'd recommend giving it a try. its not officially tested and supported on XP but works fine on there. if you have an issue, the next version i'd try is PCNS 2.2.4. let me know if you need a copy of that.

Anonymous user · ‎2021-06-30

You can install the Management Card in a card slot in a
Smart-UPS, Matrix-UPS, Symmetra UPS, or AIS 5000 UPS.
For a Silcon UPS, install the Management Card in a Silcon
Triple Chassis Protocol Converter (AP9604S).

[ Managed Network Solutions|http://www.managed.com/networking/]

Message was edited by: jack25d

Network management card 2 and Windows 2000 Server

Network management card 2 and Windows 2000 Server

This is a heading