NMC menu setting could not be found

[John.Jimenez]

I could not see NMC menu in UPS display panel even I have set the display mode from Standard to Advanced

[Teken]

It would probably be helpful to state the model UPS & NMC so better information can be given.

By default the Status / About tabs will indicate basic information about the NMC. More specifically the IP Address assigned to the NMC so you can access the web interface (assuming) HTTP / HTTPS has been enabled.

If the web interface is not enabled you’ll need to connect to the serial port and SSH to the NMC to make whatever global changes you need / want.