Low suction pressure alarm

BillP · ‎2021-06-28

The new INROW SC unit, give alarm of "Startup: Low suction pressure", when I changed the configuration to INROW in the settings menu. Any suggestions how to resolve this ?

TR
Bala

TheNotoriousKMP_apc · ‎2021-06-28

Bala,

Sorry for the delayed response. I sent this email to our Infrastruxure Cooling team who has not responded. I would recommend, as I've stated before, contacting your Infrastruxure Support.

See Answer In Context

TheNotoriousKMP_apc · ‎2021-06-28

Bala,

Sorry for the delayed response. I sent this email to our Infrastruxure Cooling team who has not responded. I would recommend, as I've stated before, contacting your Infrastruxure Support.

Anonymous user · ‎2021-06-28

The ACSC will not start if it thinks there is a major leak or if the suction and discharge are not equalized. Try new firmware just to be sure it is not a nuisance alarm, but you may need to check for leaks if that doesn't work. Data logs or event logs may help point to the cause of the alarm also. Help page on web access and user manual should help also.