Posted: 2021-07-08 11:40 PM . Last Modified: 2024-02-14 11:42 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-08 11:40 PM . Last Modified: 2024-02-14 11:42 PM
IP Address Change in PCNS
All,
The PNCS software on the client needs to know the IP address of the UPS. If the IP address on the UPS changes, is there a way to change the IP address in PCNS other than unstalling and re-installing the PNCS software?
Thanks,
-Shawn
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-08 11:40 PM . Last Modified: 2024-02-14 11:42 PM
you can use the powerchute network shutdown configuration utility-> http://nam-en.apc.com/app/answers/detail/a_id/651
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-08 11:40 PM . Last Modified: 2024-02-14 11:42 PM
you can use the powerchute network shutdown configuration utility-> http://nam-en.apc.com/app/answers/detail/a_id/651
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-08 11:41 PM . Last Modified: 2024-02-14 11:42 PM
In addition to what i_picked_a_winna has said. If you are using PCNS 3.0, it does have the configuration wizard easily accessible. You just need to login to the web interface and run the wizard.
Link copied. Please paste this link to share this article on your social media post.