How to reset language or back to factory defaults?

[Rleffler_apc]

i just received a new SMT2200C and when I first powered it on, the menus came up in a language I don’t read.   How do I reset the language back to English, when ai can’t read any of the words?  Or how to I reset the unit back to the way it was supposed to come from the factory?

[BillP · Accepted solution]

Hi Bob

It's unusual, The default language should be English however, I can guide you  the language options.

If the Display only shows your one set of information

• Press Enter and then the down arrow and Enter again
• This is the configuration options, the first option is language
• Press Enter
• Scroll to the English option
  • Depending on the language the UPS is in it will show as 
  • Anglais, Englisch, Inglés, Inglese, Inglês, 

    英語

    Press Enter and Esc to exit through the sub menus
    the wording should now make sense to you.

If the Display flashes through different information

• Press Enter and then the down arrow twice and Enter again
• This is the configuration options, the first option is language
• Press Enter
• Scroll to the English option
  • Depending on the language the UPS is in it will show as 
  • Anglais, Englisch, Inglés, Inglese, Inglês, 

    英語

    Press Enter and Esc to exit through the sub menus
  • the wording should now make sense to you.

I hope this helps

Matt