Default IP Address

[Anonymous user]

I'm installing a few APC UPS's with network management cards in all of them. I want to configure the IP address for each. Do APC UPS's have a default IP address assigned to them with factory settings so I can access them via an internet browser? The models are below.

- APC SmartUPS 2200R3XLNETPKG
- APC SmartUPS SURT8000RMXLT6U

If not, which is the easiest way to configure the IPs for the devices? There won't be a DHCP server the UPS's can access during the install so they won't be able to pull an IP automatically.

Any information would be great. Thanks!

[BillP]

Great, I hope you were able to configure it.

[BillP · Accepted solution]

Good day Mike,

Our Network Management Cards do not have any default IP address but I am pretty sure that if you have the correct settings and equipment you should be able to assign an IP address. Below is a very helpful knowledge base that would tell you all different techniques on how would you set an IP address on an NMC.

[How do you make a Network Management Card communicate on a network?|http://nam-en.apc.com/app/answers/detail/a_id/3061/kw/NMC%20configuration]

[Anonymous user · Accepted solution]

Great. Thanks. I forgot to mention I downloaded that utility already, but I did find console syntax for IP configurations.