APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Posted: 2021-07-01 12:55 AM . Last Modified: 2024-03-06 02:17 AM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 12:55 AM . Last Modified: 2024-03-06 02:17 AM
What's the difference between the AP9618 and the AP9619 management cards?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 12:55 AM . Last Modified: 2024-03-06 02:17 AM
AP9619 is an AP9617 base model network management card with Environmental Monitoring (capability to add a AP9512TBLK temp only probe or AP9512THBLK temp and humidity probe). Only one at a time can be used. In addition, the AP9619 has some output relay functionality.
AP9618 has all of this with an onboard modem for out of band management and paging capability.
Please note that the AP9618 is still current and being sold but the AP9619 is discontinued and replaced by the newer, updated AP9631 that runs on a different hardware platform and has more capability with that newer hardware.
Neither card is compatible with any Smart UPS beginning with SMT/SMX or SURTD.
hope that helps.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 12:55 AM . Last Modified: 2024-03-06 02:17 AM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 12:55 AM . Last Modified: 2024-03-06 02:17 AM
Thank you!
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-01 12:55 AM . Last Modified: 2024-03-06 02:17 AM
AP9619 is an AP9617 base model network management card with Environmental Monitoring (capability to add a AP9512TBLK temp only probe or AP9512THBLK temp and humidity probe). Only one at a time can be used. In addition, the AP9619 has some output relay functionality.
AP9618 has all of this with an onboard modem for out of band management and paging capability.
Please note that the AP9618 is still current and being sold but the AP9619 is discontinued and replaced by the newer, updated AP9631 that runs on a different hardware platform and has more capability with that newer hardware.
Neither card is compatible with any Smart UPS beginning with SMT/SMX or SURTD.
hope that helps.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.