AP8941 PDU not reachable from network remotely (works with direct connection)
APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-12-1305:26 PM
AP8941 PDU not reachable from network remotely (works with direct connection)
Hi all,
I'm using AP8941 PDU for hosting my set of servers. I'm trying to access the static management IP remotely through a switch. Initially, I configured static IP and am able to ping/http it when I connect it directly to my machine through ethernet.
Some snapshots:
However, when I connect it to my switch I'm not able to access/ping the device.
I already tested the switch port connected to PDU with a different device and it works as expected.
Few problems I can think of: - Switch has all SFP/SFP+ ports. Maybe not compatible with PDU.
- Firmware is outdated for this PDU. (could not find any downloads for this version) - I need to enable a feature in PDU to access this.