ACSC101 - Default Unit Thresholds

[BillP]

We have an ACSC101 that we are putting back into service, after some time in storage.

We couldn't find a "reset to factory defaults" option, so have been going through the menus and resetting everything to default and/or sane values.

However, we have not managed to track down the defaults for the unit thresholds:

Rack Inlet High Temperature:

Supply Air High Temperature:

Return Air High Temperature:

At the moment they are set to stupid numbers, and the unit is complaining about Temperature setting violations and abnormal states... possibly related to these settings.

Does anyone know the factory defaults (In-Row configuration) to give us a starting point ?

[BillP]

We have an ACSC101 that we are putting back into service, after some time in storage.

We couldn't find a "reset to factory defaults" option, so have been going through the menus and resetting everything to default and/or sane values.

However, we have not managed to track down the defaults for the unit thresholds:

Rack Inlet High Temperature:

Supply Air High Temperature:

Return Air High Temperature:

At the moment they are set to stupid numbers, and the unit is complaining about Temperature setting violations and abnormal states... possibly related to these settings.

Does anyone know the factory defaults (In-Row configuration) to give us a starting point ?

[BillP]

The default setting are as follows:

Rack Inlet High Temperature:  77F

Supply Air High Temperature:  77F

Return Air High Temperature:  104F

[BillP · Accepted solution]

Thanks, I'll give those a go.