Schneider Electric Community

EcoStruxureIT · ‎2021-07-15

Support for unsafe ciphers was removed as part of a security update in EcoStruxure IT Gateway version 1.8.0. NetBotz 4.x devices must now support 2048 bit certificates. Symptom Devices t...

jkhuon · ‎2020-08-11

I'm attempting to resurrect a NetBotz 420 that's boot-looping in U-boot with a "Bad Data CRC". U-Boot 1.1.4 (Jun 13 2006 - 19:04:01) CPU: MPC885ZPnn at 120 MHz: 8 kB I-Cache 8 kB D-C...

EcoStruxureIT · ‎2019-09-09

To discover NetBotz 750 appliances, choose the SNMPv1 or SNMPv3 discovery type. NetBotz 750 cameras are supported in firmware versions 5.2.x and newer only. Only a Data Center E...

SonNG · ‎2024-10-10

Hi Support teams, We are having an issue with our Netbotz 750 device where it cannot boot into the system. The description looks like below. Please guide us on how to fix it. Tks,

Infra · ‎2024-10-23

Hi Some of our Netbotz are appearing as (Post-only) in Data Center Expert. I can see various articles on what Post-only mode is, and how to put devices into Post-only mode, but nothing o...

Tafadzwa · ‎2024-10-30

Hi All, I have a client that wants to use Rack Access Cards on their Rack doors handles. I can see the Rack Handles on the NetBotz 750 and can command them to Open or Close h...

ElieTopiase · ‎2023-04-22

Hi there Just purchased this recently for a client, I'm a VAR, so the client to if its possible to do a configuration within the Netbotz appliance to monitor and sends notifications or alerts r...

ValRdgs · ‎2023-05-22

Bonjour, je souhaite piloter plusieurs relais (3) en cas de température trop élevé ou détection de fumée. Est-il possible d'ajouter un module Sealevel comme sur les NetBotz 550, ou cela ne f...

SSealey · ‎2024-03-18

I have recently started replacing my NetBotz 420 units with NetBotz 750 and 755 units. Is there a way to have the 750/755 units generate sensor reports and email them on a schedule like the 420 u...

Tafadzwa · ‎2024-05-17

Hi All, Is there a way we can use our NetBotz to measure room air pressure, particle count (per cubic meter), temperature below -5 degrees Celsius and air velocity as precise as m/s. I'm a...

Schneider Electric Community

Cannot discover NetBotz devices in Gateway

NetBotz 420 Firmware

NetBotz 750 appliance discovery process in DCE

Netbotz 750 fail to boot

Netbotz Stuck in POST-only Mode

NetBotz Rack Monitor 750 Rack Access Cards

NETBOTZ 750

NetBotz 250 Relais Supplementaire

NetBotz 750/755 sensor report

Can NetBotz Measure Room Pressure

Schneider Electric Community

This is a heading