A Rack U-Space report can be generated to review the amount of available positions in specified racks. For equipment that takes up one or more U-positions a Contiguous Free U-Space report can be generated. For both reports the following applies:

[EcoStruxureIT]

A Rack U-Space report can be generated to review the amount of available positions in specified racks. For equipment that takes up one or more U-positions a Contiguous Free U-Space report can be generated. For both reports the following applies:

The report will include data based on

• The filter selections
  • Rooms
  • Tags*

The calculations are based on equipment positioned in the rack layout and, if you have IT Advisor: Change installed, any equipment in pending state, even if it has not been added yet (Pending Add), or if it has been marked for deletion (Pending Delete), or to be moved (Pending Move).

The reports calculate the number of Front (free, used), Rear (free, used), Full Depth (free, used) u-positions. Front and Rear do not take the depth of equipment into consideration. This is done in the full-depth calculation.

*Tags included in this report are tags on racks. If more tags have been assigned to a rack, the rack will only be included in the report if all tags assigned to it have been selected in the report options.

102240483_360038496233.png