Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Link copied. Please paste this link to share this article on your social media post.
Hello,
We have a instalation where we have KNX protocol, ModBus and BACnet. The first two no problems.
Then we have a gateway fro Intesis with ref IBOX-BAC-BUS-100 (convert M-Bus to BACnet), but this act like server.
I follow every steps explain on AN001, but we couldn't get any answer. There is any trick that we have to do that is not explained on AN001? Should use KNX objects or virtual objects?
The spacelynk can only act as server? As this IntesisBox is too a server and communicates only with BACnet IP clients this is the reason why I can't get any data?
Thank you
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.