4inch POE Touch Screen

Notifications

SpaceLogic KNX Forum

Schneider Electric SpaceLogic KNX forum to get support and share knowledge including selection, installation and troubleshooting for spaceLYnk, Wiser for KNX, eConfigure KNX, SpaceLogic KNX Hybrid module and other topics.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Top Experts

User

Count

104

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Back to SpaceLogic KNX Forum

Link copied. Please paste this link to share this article on your social media post.

Quick demo of my CTC-UI running on a KNX LM displayed on a POE 4" PoE Touch Screen using my CTC-SpaceLogic App (https://crowhurst.com.au/ctc-spacelogic/)

Currently my CTC-UI (ctc-ui) is really meant for larger screen for whole home control, but it was interesting to see it running on a 4" 480px x 480px screen.

I'm using a LM for this demo, (as I have got a Wiser KNX, but it should run on this as well), it also runs on a CBUs Spacelogic automation controller.

Demo Video

Next is to update my CTC-UI for this 4" screen, to create a room specific interface with larger controls.

I also have 5.5"/8"/10" (rectangular) on order to test with

Replies 0

never-displayed

You must be signed in to add attachments

never-displayed

To The Top!