Smart Connector for Microtech 1

mhall_csande_ne · ‎2019-02-26

Is there or can we get a Smart Connector for Microtech 1/Original Microtech OPM

Thank you

Mike_Bielby · ‎2019-03-04

Not that I know of, Smart Connector is suitable for IP based system to system integrations. I checked the internet and this seems to be based on RS232. So a Smart Driver (via the AS) seems to be a better fit. What is the opportunity? @Adam_Summers Have you been asked to develop a Smart Driver for this protocol usinged on Daiken and McQuarry products.

See Answer In Context

Mike_Bielby · ‎2019-03-04

Not that I know of, Smart Connector is suitable for IP based system to system integrations. I checked the internet and this seems to be based on RS232. So a Smart Driver (via the AS) seems to be a better fit. What is the opportunity? @Adam_Summers Have you been asked to develop a Smart Driver for this protocol usinged on Daiken and McQuarry products.

Adam_Summers · ‎2019-03-07

We've not had any approach for SmartDriver on this, but as you suggested @Mike_Bielby it could be a better fit. I'd be happy to have our team provide a quotation for development in SmartDriver (native to AS-P) if I can get hold of the protocol information and user requirements. @mhall_csande_ne please reach out to me adam.summers@se.com if you woudl like us to investigate.