Schneider Electric Wiser Forum
Connect with Wiser Smart Home solution experts in the Schneider Electric Wiser forum. Discuss tips on features, updates, installation, and how to get the most out of your Wiser products.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-09-10 10:21 AM
Hi, I have a wiser Hub 2nd generation working since 4 months ago. Since yesterday, it's not connected anymore to my wifi and it rests blinking in green each second.
I've tried to turn off/on, and it's always the same routine. First led shows a fixed green, after few seconds the green led starts to blink quickly, and after few seconds starts to blink but slower, about each second, and keeps in this way forever.
I've tried to reset by holding the button but no answer, always green led blinking.
Anyone know how to proceed?
BR.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-10-29 12:12 AM
Hi, no... that's the point. There was no way to have Wiser_xxxxx back. The unit has been replaced.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-10-26 11:27 AM
Do you see the Wiser_xxxxxx wifi network? Normally this is in place if the green light is flashing. It seems strange it is doing this though!
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-10-29 12:12 AM
Hi, no... that's the point. There was no way to have Wiser_xxxxx back. The unit has been replaced.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.