ScadaPack 474 with Trio QR 450 DNP3 Guidance

[JK_TLECC]

Hello,

I am looking for any technical manuals / guides for deploying DNP3 on ScadaPack 474 PLCs with Trio QR 450 radios.   Any help locating appropriate manuals is appreciated.

Thanks,

Joel Kelley

[Joel_Weder]

Hi Joel,

It'd help if you could be more specific. I can say that Trio QR450 radios will transparently carry DNP3 traffic, no special configuration required. 

Are you hoping for more general guidance about how to configure the SCADAPack, and how to configure your Trio radios? That's a much bigger topic. If yes, there are numerous videos on the Schneider Electric YouTube channel about basic x70 RTU configuration using RemoteConnect. And quite a few videos about configuration of the QR450 radios too. 

Let us know what specifically you're needing to do. Or, if you're in a hurry you can contact our Tech Support team. Or as it appears you're in Colorado, our Sales Rep there is Beabout Brock Easley. You could contact them as well, at https://www.beaboutbrockeasley.com/

To reach our Tech Support team, go to se.com, open the Support menu, then select Contact Support. Select North America, then USA. Scroll down and you'll see contact information for Tech Support.

[aisha34]

The ScadaPack 474 is a programmable logic controller (PLC) used for remote monitoring and control of industrial processes. It can communicate with other devices using a variety of protocols, including DNP3, which is a widely used protocol for communication between SCADA (Supervisory Control and Data Acquisition) systems and RTUs (Remote Terminal Units). The Trio QR 450 is a DNP3 protocol translator that enables communication between devices using different protocols. If you need guidance on how to set up communication between a ScadaPack 474 and a Trio QR 450 using DNP3, there are various resources available online, including user manuals, forums, and technical support from the manufacturers.