[Imported] ASCII to Real Time Data

Notifications

Remote Operations Forum

Support forum for Schneider Electric SCADA systems, radios and RTUs. From commissioning integration devices and software, to enhancing existing installations or troubleshooting.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Top Experts

User

Count

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Back to Remote Operations Forum

991

Link copied. Please paste this link to share this article on your social media post.

>>Message imported from previous forum - Category:SCADAPack RTU<<
User: Vaitheeswaran, originally posted: 2019-04-20 07:43:04 Id:414
Hello All,

We need a technical support for the SCADAPack 357 Controller regarding how to convert the ASCII to Real time Data. We have a GPS and Interfaced with Controller(SCADAPack 357) successfully.

We assume receiving data as in ASCII (Please Refer the attached Image: SCADAPack 357 ASCII)

For Eg:

We are receiving the timer data packet in SCADAPack 357 as in ASCII Code from the GPS, We want the SCADAPack to show us real timing values(Time: Wed 05:56:50 and Date: September 01, 1999(As shown in Image GPS Timing Packets))

Please suggest some ideas regarding this problem.

Thanks and Regards,
Vaitheeswaran

Attached file: (editor/k4/nafnw5yd0ayo.png), GPS_Timing_Packets.png File size: 126332

Attached file: (editor/4t/ht23vq2p71s3.jpg), SCADAPack_357_ASCII.jpg File size: 9420422

Replies 0

To The Top!