5 reasons to transition MV switchgear SF6 gas to Pure Air

[Sylvain_C]

If you still have doubts on the replacement of SF6 gas in Medium Voltage switches by Pure Air, spend 5 minutes to read this paper. It will finish convincing you.

The document explains in detail the 5 reasons why you should switch SF6 gas to Pure Air:

• Reason #1 - Pure Air is Superior to a Strong Greenhouse Gas
• Reason #2 - Pure Air Requires No Recycling
• Reason #3  - Pure Air is a Win-Win Alternative to SF6
• Reason #4  - Pure Air is Green and Improves Safety
• Reason #5  - Pure Air is Free from Regulatory Concerns

Download the white paper : 5 Reasons to Transition from SF6 to Pure Air in MV Switchgear

[J_Travostino · Accepted solution]

Thanks @Sylvain_C 

Also, as complementary insights, you can have a look at the article below titled :

"How Can Regulations Reduce F-gas in Power Networks?"

Read the blog articleRead the blog article

Do not hesitate to react or ask questions.....

[J_Travostino · Accepted solution]

Dear community, 

to continue the discussion, I've added an article from Olivier Blum in our Power Fondations blog 👈 , explaining why reducing greenhouse gases, among them SF6, is major to fight climate change and electricity decarbonization

Wish you a good reading !!

[MCcompte289]

Hi,

how can I get access pls ?

thanks.

[S-W]

Hi @MCcompte289,

Why Providing Alternatives to SF6 and Other Greenhouse Gases is Important for Carbon Reduction Initiatives
https://blog.se.com/sustainability/2021/01/12/why-providing-alternatives-to-sf6-and-other-greenhouse...

How Can Regulations Reduce F-gas in Power Networks?
https://blog.se.com/sustainability/2020/09/24/how-can-regulations-reduce-f-gas-in-power-networks/ 

5 Reasons to Transition from SF6 to Pure Air in MV Switchgear

https://go.schneider-electric.com/WW_202007_6-Reasons-to-Transition-from-SF6-to-Pure-Air-Content_EA-...