iEM2455 Modbus Communications

[dave_torevell_s]

Hi Everyone,

Hoping somebody can help with the configuration of the worst Schneider meter i have ever tried to set up, aside from the terrible capacitive buttons on the front these meters will talk via modbus. Have tried everthing took them off site had them on a bench with a PAS800 and nothing else on the network still no joy.

Im trying to get two iEM2455 meters to talk modbus to an Ecostruxure AS-P but no comms, have set the addresses as 111 and 122 parity Even Baud 9600 (after a very frustrating time with the front buttons). Cannot establish comms, took them off site connected directly to PAS800 no comms, coneected only at to time to PAS800 no comms. I now need a sanity check just to make sure Im not missing a step before both meters are thrown in the bin and well find another make that works.

[Sidharthan]

@dave_torevell_s have you tried connecting the device using any USB serial convertor to check communications.