Cyber Sciences Modbus RS485 2-wire to 4-wire converter

[Anonymous user]

Looking for a reliable solution to connect 2-wire Modbus RS485 networks (or individual devices) to 4-wire? In 2004, Schneider Electric asked Cyber Sciences to develop the CNV-100 for this purpose.  Thousands of these devices have been shipped to ensure interoperability of Schneider Electric products, such as PowerLogic/ION meters, Sepam relays and Masterpact/Powerpact/Compact-NS breakers with Micrologic trip units.  The CNV-100 supports baud rates of 9600, 19.2k and 38.4k bps and requires NO configuration.  It is compatible with any RS485 device with Modbus protocol (or any other ASCII-based protocol).

Attached is a white paper (Tech Note TN-106) which illustrates many possible system architectures.

The CNV-100 is stocked in large quantities in Victoria and can be ordered by =S= countries and partners in the same way as other PowerLogic/ION products.

Please contact Cyber Sciences or reply to this post if we can help answer any questions.  (And please excuse the self-promotion!  Since the CNV-100 is stocked by =S= I hope it is helpful.)

[sesa205726_brid]

Sarò assente dall'ufficio a partire dal 12/10/2013 e non tornerò fino al

23/10/2013.

Risponderò al messaggio al mio ritorno.