Machine Automation Forum
A forum addressing machine automation solutions for the complete machine lifecycle. Including offers like Machine Advisor, Modicon PLC/PacDrive, Lexium or Preventa. Discuss and share knowledge on offers relating to cloud-based service platforms, machine localization and monitoring, industrial operations control, motion products as well as safety function!
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-06-04 11:26 PM
Hi,
1. How to show data time on the graph in Vijeo Designer ?
2. It is possible to show units of value on the graph?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-06-05 12:25 AM
I believe you need to use an "Historical Trend" rather than the normal "Trend", see below the example:
For the unit i just added a plain text in the border, I am not 100% sure if we can do that in the normal trend or in this historical trend.
Best regards,
LeTomas
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-06-05 11:45 PM
Hi,
Thanks, @LeTomas for your advice I check it.
I have another question about how to show on HMI, UDINT 32bits variable
At first how to send that value (32bits) through modbus TCP using 2 WORD registers.
Second how to show that value on HMI.
I will try to do this in that way because I don't know how to send variables using 2 words :
1. Create a variable in PLC eg. %MD1 and assign to them 32bit variable.
2. On Vijeo Designer I have that settings:
After doing it that way HMI displayed 0 but on PLC app value is correct.
I using Machine Expert v 2.1, Vijeo Designer, and HMI is the same as the beginning topic.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-06-06 03:04 AM
Hi @pawel_kowalski_ ,
I believe i explained in a previous post but maybe it was not clear enough.
Please check the next video:
Best regards,
LeTomas
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-06-12 12:08 AM
After starting PLC the value was shown property in Machine Expert
In Vijeo Designer configuration below
Give me know what I can check to resolve that problem.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-06-12 03:01 AM
Attached you can find an excel file that allows you to import the variables from SoMachine/Machine Expert to Vijeo Designer without using the symbol configurator. Give it a try and let me know.
Best regards,
LeTomas
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.