Schneider Concept 2.6 SR7 software

[fsiscott]

I'm in need of Schneider Concept 2.6 SR7 software. Is there anyway to get this software? My customer has program files, but no installation software.

[Michael_Chan]

The installation of Concept V2.6 Service Release 7 requires at least an installed Concept V2.6 basic version.
Concept 2.6 SR7 contains all changes from Concept 2.6 SR1 till Concept 2.6 SR6a.

Here is the link with about 1 week of validity: Concept V2.6

[fsiscott]

Thank you!

[GAOJACK]

Hello, my name is Galo Alvarez. Can you help me with the installer of Concept V2.6?

[Michael_Chan]

You may find your answer here: https://www.se.com/sg/en/faqs/FA337775/ 

[Balachandar.chandra]

Hi, We are working on a project where we have the backup file of Concept 2.6 Software. I need the software to open the file. Is it possible to get Concept 2.6 Software?

[Michael_Chan]

The installation of Concept V2.6 Service Release 7 requires at least an installed Concept V2.6 basic version. Concept 2.6 SR7 contains all changes from Concept 2.6 SR1 to Concept 2.6 SR6a.

Here is the link with about 2 week of validity: Concept2.6SR7

[GAOJACK]

Dear Michael, please receive a cordial greeting.

I would like to thank you for explaining the sequence for installing the programs and likewise the access for downloading the respective installers.

[Balachandar.chandra]

Thank you for your response, I also need Concept 2.6 basic version software. Can you please provide link for that also. 

[Michael_Chan]

The basic version can also be found in the link in the same folder.

[Balachandar.chandra]

Thank you. I have taken the files and tried installing it in Virtual environment using VMware player, while installing, it stops in middle and installation closes. Please find the attachment of error message for your reference. Also i could able to see a folder in c drive with some files in it. 

[Michael_Chan]

These are the only files I have from my old hard disk. Some of these files may already be corrupted.

I can share my VM image with you, which is still functioning properly. Here's the link: Legacy Products (size 9GB).

Please download the file as soon as possible; the link will expire in one week due to storage costs.

[M_Mann]

Is it possible to load or convert Concept 2.6 project files into Momentum EcoStructure environment? 

Have a 171CCC78010 intermittently faulting suspect it's on the way out. Seems Replacement would be something along the lines of 171 CBU 78090.

[lojohs]

Any chance I can get an updated link for Concept 2.6?

[Michael_Chan]

Try this link: Concept2.6SR7

[Michael_Chan]

1) Export your Concept 2.6 Project files as an .ASC file format.
2) Open Unity Pro and select File -> Open to import the .ASC File.

You may need to compile the project and address any warnings or errors.

[TobiasAcCon]

Hello everyone,

is there still a possibility to get the Software for Schneider Concept 2.6 anywhere? I searched the whole internet and didn't come up with anything where I can dowload it.