Run as Remote TargetVisu on my HMIGXU5512

[alyssonmr]

Hi there!! I would like to know the step-by-step process for downloading the screens created in Machine Expert Builder via Remote TargetVisu. I saw something similar through Codesys where the programmer used a USB flash drive to download to the HMI and also used a program called RemoteTargetVisu.exe.
I looked for a tutorial for Machine Expert, but I couldn't find one.
Could someone help me, please? Thank you.

[ismailozinan]

Hi,

For the download process you want to use, your architecture must be designed accordingly.

1. You need to use the Machine Expert protocol between the PLC and the HMI.
2. When creating the Codesys project, you must add both your HMIs and PLCs from the Add Device section so they all appear under the same project. Please note that Easy series HMIs do not appear in this section; you can only use the HMIs listed under Add Device.

Once the architecture is set up, when you download to the PLC, your other devices will also appear under Communication Settings. From the Online menu, you can use Multidownload to download to all devices simultaneously.