Industry Automation and Control Forum
This forum is addressing industrial automation design & engineering, operations, asset performance, cyber security and digital transformation for Plants & Machines.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-10-03 01:11 AM . Last Modified: 2023-10-03 01:11 AM
Hello
Thanks to support ,I need Modbus DTM version 1.5.0 as PC has 1.4.0 and never accept to build modbus dtm with version 1.5.0
I tried to download this :https://www.se.com/eg/en/download/document/Modbus+Communication+DTM+Library/
with no actual result ,so if anyone faced this issue to provide with dtm newer version
thanks
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-10-03 11:24 PM
Hello Salah,
You have a mix program with different version of DTM of Control Expert. You try to open (I believe) with CE 15.2, but the DTM are from CE15.3.
I advice you to install the last version of CE 15.3.
You can see this information on ReleaseNotes of Control Expert of you PC
Goodluck!
Ricard
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-10-03 11:28 PM
I'm sorry, I left out commenting on one thing 😁, the DTM that you are downloading is another topic. The CE DTMs are in the product ISO or sometimes in an HF update.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.