Industry Automation and Control Forum
This forum is addressing industrial automation design & engineering, operations, asset performance, cyber security and digital transformation for Plants & Machines.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "edge control"
View in: "Industry Automation and Control Forum" | Community
29 Posts | First Used: 2019-07-04
Hello All,
We have a BMEAHI0812 analog input module connected to M580 Standalone PLC (BMEP586040)
The firmware version on the AI module is 1.4 and CPU is 3.20
DTM version of the Mx80 HART Gateways is ...
I have a Teltonika TRB-245 GSM module, which supports 'HTTP GET' request for SMS service via LAN port. Now I want to send andreceive SMS trough Vejio Designer(Magelis HMI) with the GSM module. Please h...
Hi,a customer brought up this rather simple question but i would like to confirm if there would be any interference in signal if we wire let's say a 2 wire transmitter on channel 1 and a 4 wire transmi...
Hi guys,We need comunicate our M5580 with a lot of same kind inverter and we would like to create a template for the modbus TCP comunication of inverter, this avoid configurate each device from 0 all t...
Dear Allwe want to configure a scada using CITECT with many M221 PLC's installed remotelybut the only commu nication way is a VSAT internet communicationis it possible to establish the communication wi...
Hi Experts,
Previously, I used to have the IO card on the same rack as the PLC, which could be addressed topologically, e.g. %I1.4.0, or %Q1.7.0.
In current project, there is a remote IO card on a X8...
Hi,I Need a step by step user guide document to use TM5 with M580 over TCP/IPAny help will be appreciated.
I'm college student currently studying industrial automation so this question might seem basic.The text in the first picture (screenshot(590)) states that the number of wires needed for n machines are ...
6ES7656-7EM30-1CF2 Siemens#siemensPLC SystemsSIMATIC PCS 7 Redundancy AS in individual components: With 2 x 16 MB RAM memory cards With 2 x CPU 417 H incl. AS RT PO 100 With 2 x 2 10 m sync module and ...
Solved
I want to communicate and diagnose the fault appearing in the plc,through software.Its modicon TSX premium.I Want to know- what is the setup required for communication which is the software,os,communi...
I have a customer need for a separation of two M580 hot standby CPUs of at least 13 miles (21 km). Our standard single mode fiber SFP module has a range of 15 km, or 9.3 miles. Has anyone tested any hi...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.