Industry Automation and Control Forum
This forum is addressing industrial automation design & engineering, operations, asset performance, cyber security and digital transformation for Plants & Machines.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "connected products"
View in: "Industry Automation and Control Forum" | Community
55 Posts | First Used: 2019-07-04
Tried to send email from CitectSCADA via MailLogon, MailSend and MailLogoff functions, but it isn't working. Are there any special requirements for this? Do I need to specially configure Microsoft Outl...
Hello everyone,
I want to check the functionality of various ATV interfaces such as Profinet, Profibus or EtherCat using a PLC a HMI and gateways to convert Modbus-RTU to these protocolls. But now the ...
Solved
I am programming M580 HSBY redundant system at my job. I need to ask my customer to give me fixed IP address list for the system.I have two racks that includesPLC 4 slots Ethernet BackplaneX80 DC Power...
Hello,I'm having an issue in Control Expert V15.2 where when I open up the DTM browser and attempt to connect to any ATV340 listed in the DTM browser I get a message saying: "Impossible to go in on-lin...
Hello All,
We have a BMEAHI0812 analog input module connected to M580 Standalone PLC (BMEP586040)
The firmware version on the AI module is 1.4 and CPU is 3.20
DTM version of the Mx80 HART Gateways is ...
Hello! I'm setting up FDR on a group of ATV340s. I'm running into an issue where two out of about 30 VFDs are getting assigned IP addresses that are not listed anywhere in my program/the FDR server lis...
HelloI'm working on communicating 1 TM221CE40T with 4 ATV930 and other M221 PLC, using modbus TCP IOScanner.I created the configuration for the 5 channels in the PLC program but 3 of them not connected...
Hi guys,We need comunicate our M5580 with a lot of same kind inverter and we would like to create a template for the modbus TCP comunication of inverter, this avoid configurate each device from 0 all t...
Solved
Hello,I'm new to Schneider's modicon plc's. so, needed some help with selecting a proper plc for 15 pid application.detail:-15 VFD's need to be controlled using 15 temperature sensors used in the field...
Solved
Which Port i Can use for Modbus TCP Communication for - P582020, with Other Modbus Devices, and How to Do that ?As Following the Instruction Video, i couldn`t Find Model Familyhttps://www.youtube.com/w...
Dear Allwe want to configure a scada using CITECT with many M221 PLC's installed remotelybut the only commu nication way is a VSAT internet communicationis it possible to establish the communication wi...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.