Issue
In Control Expert, a generic modbus DTM can be configured to establish a modbus communication between an M580 controller and an Edge I/O NTS island but it only offers general parameters and limited options to configure, operate and diagnose the distributed I/O system.
Resolution
This article provides a step-by-step guide to configure and integrate a Modicon Edge I/O NTS island in an M580 standalone architecture using the built-in Modbus DTM (Device Type Manager) in EcoStruxure Control Expert.
Disclaimer
The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.
