HMI XBTGT6330 Vijeo Designer 6.2 time on graph

[pawel_kowalski_]

Hi,

1. How to show data time on the graph in Vijeo Designer ?
2. It is possible to show units of value on the graph?

[LeTomas]

Hi @pawel_kowalski_ 

I believe you need to use an "Historical Trend" rather than the normal "Trend", see below the example:

For the unit i just added a plain text in the border, I am not 100% sure if we can do that in the normal trend or in this historical trend.

Best regards,

LeTomas

[pawel_kowalski_]

Hi,
Thanks, @LeTomas  for your advice I check it.

I have another question about how to show on HMI, UDINT 32bits variable 
At first how to send that value (32bits) through modbus TCP using 2 WORD registers.
Second how to show that value on HMI.

I will try to do this in that way because I don't know how to send variables using 2 words :
1. Create a variable in PLC eg. %MD1 and assign to them 32bit variable.

2. On Vijeo Designer I have that settings:

After doing it that way HMI displayed 0 but on PLC app value is correct.

I using Machine Expert v 2.1, Vijeo Designer, and HMI is the same as the beginning topic.

[LeTomas]

Hi @pawel_kowalski_ ,

I believe i explained in a previous post but maybe it was not clear enough.

Please check the next video:

https://youtu.be/9x6tPYZH2AA

Best regards,

LeTomas

[pawel_kowalski_]

Hi,

I watched the video and tested this solution but it doesn't work, very likely I'm doing something wrong. Below are pictures of the configuration.

Declaration in GVL

Here I assigned to the DWORD variable the value I want to send

After starting PLC the value was shown property in Machine Expert

In Vijeo Designer configuration below

Give me know what I can check to resolve that problem.

[LeTomas]

Hi @pawel_kowalski_ 

Attached you can find an excel file that allows you to import the variables from SoMachine/Machine Expert to Vijeo Designer without using the symbol configurator. Give it a try and let me know.

Best regards,

LeTomas