ClearSCADA 2009 R2 SCADAWave Diagnostics Driver

Notifications

Geo SCADA Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Geo SCADA experts.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

553

Link copied. Please paste this link to share this article on your social media post.

Originally published on Geo SCADA Knowledge Base by Anonymous user | June 10, 2021 12:58 AM

📖 Home Back
As part of the installation for ClearSCADA 2009 R2, Control Microsystems is pleased to include a driver that allows monitoring of diagnostic information from the SCADAWave range of radios.

This driver provides support for the E-Series, M-Series and K-Series SCADAWave radios, and retrieves diagnostic information from these radios.

To install the driver, run the setup.exe file from the SCADAWave Installer link below (zip file).

File: SCADAWave Installer (See links below)

The user manual will be installed to the ClearSCADA folder by the installer. Refer to the Installation chapter of the User Manual for further information.

Go: Home Back

Author

Anonymous user

To The Top!