Panel Server Alarms

[AndersDahlskog]

Hi

In Panel Server Settings-Data Management-Alarms

Must a specific alarm (in this case a HeatTag) be activated here for a energy Management system e.g PME or other should be able to read the specific Modbus register and see the alarm in the system ?

See attached file for more info

BR/Anders

[Guillaume_Evrard · Accepted solution]

hello @AndersDahlskog 

Alarms/ events as far as I remember are related to cloud publication. Initially it was necessary to configure the alarm in order to see the alarm displayed on the EWP ( shown in PAS600 and displayed in a list on PAS800), but I remember It was changed long time ago. In regards to PME I would say  the driver is getting the alarm level low medium and high from the modbus table. Alarm activation should not have any effect on PME.

HeatTag PME driver should provide the registers.

Kind Regards

[Romain_Polette · Accepted solution]

Hello @AndersDahlskog , 

3 cases:

1. Panel Server standalone: if I'm not wrong, alarms are available through e-mail. You can manage them locally.
2. Panel Server + Cloud Services: Alarms are managed by Cloud Services.
3. Panel Server + PME: All Panel Server devices alarms are available through Modbus registers. Then alarms on PME are managed by the PME device drivers.

Regards, 

[AndersDahlskog]

Hello, thanks for your reply, I understand.

BR/Anders