Does a register list exist for the ComX'210 & ComX'510?

[Philippe_Morel]

Does a register list exist for the ComX'210 & ComX'510?

I want to read the information from the analog and digital inputs with StruxureWare Power Monitoring Expert.

Or will there be a driver in the near future for PME7 and PME8?

[sesa209813 · Accepted solution]

Hi Philippe,

I believe what you're looking for is in the 510 user manual appendix, pages 183-4: http://www.schneider-electric.com/ww/en/download/document/DOCA0098EN

Thanks,

Katie

[Anonymous user]

Hi, Philippe

I would like to add to the Katie answer, Com’X 210 Register Mapping you can find in the following link user manual (firmware version 1.4.6)

Appendix D  (pag 157-158)

Note: don't forget to activate the function "Modbus gateway access"  ("Settings" main tab)

Best Regards

Lazaro

[Philippe_Morel]

Hi Katie & Lazaro,

Thank you!

The only thing that I don't find are the analog register addresses.

Still note 5 contains information about the analog inputs. (page 184 for the Com'X510 and page 157 for the Com'X210.)

And the ComX'210 does give the analog register addresses for the extensions. (page 158 for the Com'X210)

Greetings,

Philippe

[Anonymous user]

Hi, Philippe

It seems that it is a "mistake", because the mentioned registers are from Com'X main module,

my test :

Best Regards

Lazaro

[Philippe_Morel]

Lazaro,

Thank you very much!

Best Regards,

Philippe