Com'X510 & Adfweb HD67029 - MBUS > Modbus problem

[dario_andl_nabl]

Hi to all, 

can someone help me convert Mbus protocol from power meter iEM3235 to Modbus using Adfweb HD67029 gateway and read data in Com'X510 Energy server?

I am not familiar with MBUS and I don't know how to manually create points which needs translate to Modbus.

Using automatic "Scan&Decode" function in Adfweb I got modbus registers but I don't read correct values in com'x510 on those registers.

I tried to change modbus data type, register +-1 but without success to read anything correctly.

[GokhanT]

hi , 

could you please check to read the registers with Modbus Doctor (Simulator) to be sure that you check correct register ? length of data is also important point you should be sure such as int16 , uint16, float 32 etc.