Ecodial Report - Legend

[abdulraoof]

Hi,

I am looking for a legend which I can attach to the report for the values that are available in the report as below 

Ik3max

Ik2max

Ik1max

Ik2min

Ik1min

Iefmin

Ief2min

Iefmax

[Genghiz · Accepted solution]

Hello Abdul, 

Here is the list of legends received from the 'product development team.' If any clarifications needed, kindly please come back.

Code	Definition
Iz	Load current values(This is calculated along with load current and compensation current due to various derating factors)
Ik3M	Possible maximum short circuit current calculation when there is 3 phase fault occurs
Ik2M	Possible maximum short circuit current calculation when 2 phase fault occurs
Ik1M	Possible maximum short circuit current calculation when single phase to ground/earth fault occurs
Ik2min	Possible minimum short circuit current calculation when 2 phase fault occurs
Ik1min	Possible minimum short circuit current calculation when single phase to ground/earth fault occurs
Iefmax	Possible Maximum short circuit current calculation when earth fault occurs
Ief2min	Possible minimum short circuit current calculation when 2  phase to earth fault occurs
∑∆u3p (%)	Percentage of "cumulated voltage drop" from upstream for 3 phase circuit
∆U3L (%)	Percentage voltage drop for 3 phase circuit
∆UL1L2 (%)	Percentage voltage drop between 2 phases .ie, L1 & L2
∆UL2L3 (%)	Percentage voltage drop between 2 phases .ie, L2 & L3
∆UL3L1 (%)	Percentage voltage drop between 2 phases .ie, L3 & L1
∆UL1N (%)	Percentage voltage drop between 1 phases .ie, L1 & N
∆UL2N (%)	Percentage voltage drop between 1 phases .ie, L2 & N
∆UL3N (%)	Percentage voltage drop between 1 phases .ie, L3 & N

Thanks & Regads,

Team - Ecodial Expert Support

[Proyectos11]

Hola, quisiera saber si puedo modificar este valor de ik3max?