Oversizing of cables

Francois1 · ‎2023-10-16

EcoStruxure power design - Ecodial 5.0.0 INT

Hi,

Why does the current carrying capacities or Iz in Ecodial differs from the values specified in BS5467.

Thank you.

Francois Joubert

Genghiz · ‎2023-10-17

Hello Francois,

Thanks for your query in EcoStruxure Power Design Forum.

The Ecodial application is following the installation rules defined by the IEC 60364-5-52 & 54 standards.

This has not considered the British Standard BS5467.

So, the sizing of conductors must be in match with the ‘tables defined at the 60364-5-52.

Regards,

Team – Ecodial Expert Support.

Genghiz · ‎2023-10-17

Hello Francois,

Thanks for your query in EcoStruxure Power Design Forum.

The Ecodial application is following the installation rules defined by the IEC 60364-5-52 & 54 standards.

This has not considered the British Standard BS5467.

So, the sizing of conductors must be in match with the ‘tables defined at the 60364-5-52.

Regards,

Team – Ecodial Expert Support.

Genghiz · ‎2023-10-24

Hello Francois,

In continuation with the above discussions, Do you have any comparison of conductors and Iz values with the IEC 60364-5-52.

Kindly please let us know, if have any nonconformities on the above due to any latest updates on the IEC standard.

Regards,

Team – Ecodial Expert Support