capacity history report coming empty

[DCIM_Support]

what could be the reason that capacity history report coming empty even though the Server is running and capacity groups defined.

(CID:93913979)

[DCIM_Support]

I have had similar issues. Just ran a quick test on my server. Even though data should be available, some of the data type results in an empty capacity report: Measured A-Feed Average: There is no data available Estimated load: There is no data available Estimated failover load: There is no data available Available u-space: Ok Retirement candidates: Ok Server quantity: Ok

(CID:93913988)

[DCIM_Support]

Hi Shemil/Christian,

It is most likely because the data type used in the report is not available on the level chosen in the location/equipment selection of the report.

Measured A-feed average: Rack/UPS level

Estimated load: Rack/UPS level

Estimated failover load: Rack/UPS level

Available U-Space: Room/Rack

Retirement candidate: Room

Server quantity: Room/Rack

I will at some point work on making the Capacity History (KPI) Description include that level of detail.

(CID:93914004)

[DCIM_Support]

Then it would make sense to tell/show the user, that the room selection is not valid, before the (empty) report is generated.

(CID:93914014)

[DCIM_Support]

Agree. This is tracked is a thing to improve.

(CID:93914016)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.