EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2020-07-04 11:43 PM
This question was originally posted on DCIM Support by Eric Clark on 2018-09-17
Where is the list of cameras that Schneider will permit us to use with their system for surveillance?
Cameras that are not Netbotz, obviously we know those are permitted.
(CID:134032914)
Posted: 2020-07-04 11:43 PM
This answer was originally posted on DCIM Support by spezialist on 2018-09-18
Dear Eric Clark,
From your question:
...Cameras that are not Netbotz, obviously we know those are permitted.
This is true, but these cameras should still be connected to the NetBotz-400/450/570 appliances.
In addition, only Pelco Inc. cameras are officially supported, see for example NetBotz Compatibility Matrix and Models of Pelco cameras that have been tested with version 3 NetBotz and BotzWare 4.X.
With respect.
(CID:134033113)
Posted: 2020-07-04 11:43 PM
This comment was originally posted on DCIM Support by Eric Clark on 2018-09-18
thanks for the link.
I am confused though.
Why would a camera that functions on Internet Protocol need to have a netbotz involved? Its just an additional layer of complexity that will reduce quality and reliability.
A Netbotz 570 can only support 4 camera pods (is this the same limitation for IP cameras?)- so That means my cost per camera is : camera + Stuxureware License + 25% of Netbotz = $ zzzz
need to do a cost / benefit analysis
(CID:134033865)
Posted: 2020-07-04 11:43 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.