Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84766members
354198posts

acrc103 firmware

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

DCIM_Support
Picard
Picard
0 Likes
3
188

acrc103 firmware

This question was originally posted on DCIM Support by John Smith on 2018-05-17


I have a bunch of ACRC103S units, I do not see the firmware in the apc.com firmware downloader. what is the latest or last firmware released for those units?

Is there a 6.X firmware to allow for Modbus TCP?

Regards,

J

(CID:131962182)

3 Replies 3
DCIM_Support
Picard
Picard
0 Likes
1
188

Re: acrc103 firmware

This answer was originally posted on DCIM Support by Kevin Kolobe on 2018-05-18


Hi John,

I suppose you have ACRC301S units instead. Cannot confirm if we have Modbus TCP as yet but you will find the latest available firmware (v6.1.7) on the below link.

http://www.apc.com/za/en/tools/download/software_comp.cfm?sw_sku=SFRCFW6XX

 

(CID:131962367)

DCIM_Support
Picard
Picard
0 Likes
0
188

Re: acrc103 firmware

This comment was originally posted on DCIM Support by John Smith on 2018-05-21


Kevin, Thanks but no. I have many of the older models of InRows which are the ACRC103s.

The newer models are the ACRC301s...

Confusing, I know.

 

(CID:131963622)

DCIM_Support
Picard
Picard
0 Likes
0
188

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.