Symmetra PX UPS

DCIM_Support · ‎2020-07-05

Dear team,

Symmetra PX ups output current is L1-22A showing on its user display while i had checked physical with clamp meter which in 60Amp. Means L1-22Amp reading is incorrect, I have replaced it MIM/RIM for its rectification but this issue is still exist. Please tell guide is there any other step to rectify or its malfunctioning of Current Transformer.

Regards

MS

DCIM_Support · ‎2020-07-05

Dear Muhammad Shahzad,

I suspect, that this problem is related to the malfunction of the current transformer in phase L1. Six months ago, I had a similar problem.

Conclusion: You need to contact the =SE= local service center staff to replace defective parts in your UPS.

With respect.

See Answer In Context

DCIM_Support · ‎2020-07-05

Dear Muhammad Shahzad,

I suspect, that this problem is related to the malfunction of the current transformer in phase L1. Six months ago, I had a similar problem.

Conclusion: You need to contact the =SE= local service center staff to replace defective parts in your UPS.

With respect.

DCIM_Support · ‎2020-07-05

Thanks spezialist

DCIM_Support · ‎2020-07-05

Ok, very thanks for the good feedback 😀.

DCIM_Support · ‎2020-07-05

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.