Server Utilization Report issue

[DCIM_Support]

Hello team,

we have an installation with DCO 8.2.7 and IT Optimize and in the Server Utilization Report we do not see the discovered servers in Assets selection:

In the list appear servers that have been imported by ETL integration from a CMDB that are not associated to any device in the model:

(CID:152077252)

[DCIM_Support]

Hello Javier.

Unless I'm mistaking the items in that list which should be from ITO will be based on their discovered names as they'd appear in the unassociated items list, not the names of the racked asset (unless of course they match).

The report shows items from external systems which would include DCE or ETL. So you may need to filter the names in the device list.

Regards

Greg Sterling

(CID:152077406)

[DCIM_Support]

Hi Greg,

the problem is that in the Server Utilization report's list only appears the names of the imported ETL unassociated devices. None of the discovered devices by ITO appears.

Regards

(CID:152077431)

[DCIM_Support]

Ok. You screenshot of discovered devices shows cmdb entries. Are the ITO entries present in that list too?

Regards

Greg Sterling

(CID:152077470)

[DCIM_Support]

Hi Greg,

the ITO servers also appear in discovered devices view. But in the report server list, there are only the servers from CMD ETL.

Discovered devices:

Servers in the report:

Regards.

(CID:152077482)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.