Scaling issue with recent DDL - Eaton EMS/PDU version 5

[DCIM_Support]

New DCE user here:

This latest version of the DDL (v.5) reports data down to the branch circuit level.

We've noticed that Breaker Phase Current reporting  is off by a factor of 10. - eg. It's reporting 90A phase current, when it should be reporting 9.0A. This is consistent for each phase.

If there'a a better place to report this kind of bug,  please let me know.

(CID:100340425)

[DCIM_Support · Accepted solution]

Hi John,

3rd party DDF files are created and maintained by a group at the following e-mail address:

multivendorsupport@apcc.com

Usually, to create a DDF they request a MIB and an SNMPwalk. They may request this again but if you have information such as screenshot showing the invalid format within DCE and where it is showing correctly, they should be able to correct it easily.

Thanks,
Steve 

(CID:100340427)

[DCIM_Support]

Thanks Steve,   email sent to multivendor support.

(CID:100340445)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.